Cen-Tech Infrared Thermometer Calibration Procedure. Technicians use industrial black bodies, however, you can do a quick calibration using a. Crushed ice solution is reasonably straightforward to use.

Cen-Tech Infrared Thermometer Calibration ProcedureCen-Tech Infrared Thermometer Calibration Procedure

Shutdown and breakdown the instruments as necessary for calibration and provide access to flw personnel. In general, you need to make a squished ice and water mix that has a sludge uniformity. To calibrate the infrared thermometer, you can use crushed ice.

And You Can Use A Comparator To Verify Your Result.

The mounting device may be a tripod, a fixture, or a hand. Host flw technicians, make security arrangements and stage the instruments for calibration. Because a laser beam is involved, it is important to be very cautious during its use.

As The Distance From The Object Increase, The Spot Size Of Measuring Area Becomes Large.

Fill a glass with crushed ice. Therefore radiation emitted by the detector itself must be considered in the calibration process. Infrared thermometers can be calibrated for accuracy just like other thermometers.

Stir A Few Times For Uniformity.

Allow the ice/water to rest for a minute or two. Hold the infrared thermometer directly over the top of the ice/water at a distance of about 3″. For these thermometers to be marketed, the manufacturer must justify its correct and safe operation through calibration and precision tests beforehand.

Infrared Laser Thermometers Are Highly Accurate, Useful Devices That Have Found Applications In Many Different Fields.

The infrared thermometer does not use a laser beam to measure a person's temperature but uses infrared rays that detect body temperature without impacting the retina. Spray a little cooking oil on the cast iron’s surface to ensure proper emissivity. Add a little clean water until the glass is full and stir.

Wait For About Thirty Seconds And Check That The Thermometer Reads 32°F.

If it does, then it is accurate, but if not, it requires calibration. It is best to calibrate your infrared thermometer at more than one temperature (at 41°f [5°c] and 140°f [60°c] for example) and the infrared comparator cup makes it easy. The object under test should be large than the spot size calculated by the field of view diagram.

Comments to: Cen-Tech Infrared Thermometer Calibration Procedure

Your email address will not be published.